aimofederico ha scritto: ciao vi ringrazio per i vostri consigli, si esatto ieri infatti ho fatto come voi consigliavate.
infatti ora con il mio profilo hw funziona correttamente su pic18f4550.
ora volevo però compilarlo per 18f2550 perchè ho già una scheda pronta con tale processore, quindi ho modificato la righa
Code:
/********************************************************************
FileName: HardwareProfile - PICDEM FSUSB.h
Dependencies: See INCLUDES section
Processor: PIC18 USB Microcontrollers
Hardware: PICDEM FSUSB
Compiler: Microchip C18
Company: Microchip Technology, Inc.
Software License Agreement:
The software supplied herewith by Microchip Technology Incorporated
(the “Company”) for its PIC® Microcontroller is intended and
supplied to you, the Company’s customer, for use solely and
exclusively on Microchip PIC Microcontroller products. The
software is owned by the Company and/or its supplier, and is
protected under applicable copyright laws. All rights are reserved.
Any use in violation of the foregoing restrictions may subject the
user to criminal sanctions under applicable laws, as well as to
civil liability for the breach of the terms and conditions of this
license.
THIS SOFTWARE IS PROVIDED IN AN “AS IS” CONDITION. NO WARRANTIES,
WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED
TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT,
IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
********************************************************************
File Description:
Change History:
Rev Date Description
1.0 11/19/2004 Initial release
2.1 02/26/2007 Updated for simplicity and to use common
coding style
2.3 09/15/2008 Broke out each hardware platform into its own
"HardwareProfile - xxx.h" file
********************************************************************/
#ifndef HARDWARE_PROFILE_PICDEM_FSUSB_H
#define HARDWARE_PROFILE_PICDEM_FSUSB_H
/*******************************************************************/
/******** USB stack hardware selection options *********************/
/*******************************************************************/
//This section is the set of definitions required by the MCHPFSUSB
// framework. These definitions tell the firmware what mode it is
// running in, and where it can find the results to some information
// that the stack needs.
//These definitions are required by every application developed with
// this revision of the MCHPFSUSB framework. Please review each
// option carefully and determine which options are desired/required
// for your application.
//The PICDEM FS USB Demo Board platform supports the USE_SELF_POWER_SENSE_IO
//and USE_USB_BUS_SENSE_IO features. Uncomment the below line(s) if
//it is desireable to use one or both of the features.
//#define USE_SELF_POWER_SENSE_IO
#define tris_self_power TRISAbits.TRISA2 // Input
#if defined(USE_SELF_POWER_SENSE_IO)
#define self_power PORTAbits.RA2 //non so se metterlo a null per avere il porto a libero
#else
#define self_power 1
#endif
//#define USE_USB_BUS_SENSE_IO
#define tris_usb_bus_sense TRISAbits.TRISA1 // Input
#if defined(USE_USB_BUS_SENSE_IO)
#define USB_BUS_SENSE PORTAbits.RA1 //non so se metterlo a null per avere il porto a libero
#else
#define USB_BUS_SENSE 1
#endif
//Uncomment the following line to make the output HEX of this
// project work with the MCHPUSB Bootloader
//#define PROGRAMMABLE_WITH_USB_MCHPUSB_BOOTLOADER
//Uncomment the following line to make the output HEX of this
// project work with the HID Bootloader
#define PROGRAMMABLE_WITH_USB_HID_BOOTLOADER
/*******************************************************************/
/*******************************************************************/
/*******************************************************************/
/******** Application specific definitions *************************/
/*******************************************************************/
/*******************************************************************/
/*******************************************************************/
/** Board definition ***********************************************/
//These defintions will tell the main() function which board is
// currently selected. This will allow the application to add
// the correct configuration bits as wells use the correct
// initialization functions for the board. These defitions are only
// required in the stack provided demos. They are not required in
// final application design.
#define DEMO_BOARD PICDEM_FS_USB
#define PICDEM_FS_USB
#define CLOCK_FREQ 48000000
#define GetSystemClock() (CLOCK_FREQ)
/** LED ************************************************************/
#define mInitAllLEDs() LATB &= 0xF0; TRISB &= 0xF0;
#define mLED_1 LATBbits.LATB0
#define mLED_2 LATBbits.LATB1
#define mLED_3 LATBbits.LATB2
#define mLED_4 LATBbits.LATB3
#define mGetLED_1() mLED_1
#define mGetLED_2() mLED_2
#define mGetLED_3() mLED_3
#define mGetLED_4() mLED_4
#define mLED_1_On() mLED_1 = 1;
#define mLED_2_On() mLED_2 = 1;
#define mLED_3_On() mLED_3 = 1;
#define mLED_4_On() mLED_4 = 1;
#define mLED_1_Off() mLED_1 = 0;
#define mLED_2_Off() mLED_2 = 0;
#define mLED_3_Off() mLED_3 = 0;
#define mLED_4_Off() mLED_4 = 0;
#define mLED_1_Toggle() mLED_1 = !mLED_1;
#define mLED_2_Toggle() mLED_2 = !mLED_2;
#define mLED_3_Toggle() mLED_3 = !mLED_3;
#define mLED_4_Toggle() mLED_4 = !mLED_4;
/** SWITCH *********************************************************/
#define mInitAllSwitches() TRISAbits.TRISA0=1;TRISAbits.TRISA1=1;
#define mInitSwitch2() TRISAbits.TRISA0=1;
#define mInitSwitch3() TRISAbits.TRISA1=1;
#define sw2 PORTAbits.RA0
#define sw3 PORTAbits.RA1
/** RS 232 lines ****************************************************/
#define UART_TRISTx TRISCbits.TRISC6
#define UART_TRISRx TRISCbits.TRISC7
#define UART_Tx PORTCbits.RC6
#define UART_Rx PORTCbits.RC7
#define UART_TRISRTS TRISAbits.TRISA2//=0;
#define UART_RTS PORTAbits.RA2
#define UART_TRISDTR TRISAbits.TRISA3//=1;
#define UART_DTR PORTAbits.RA3
#define UART_ENABLE RCSTAbits.SPEN
/** USB external transceiver interface (optional) ******************/
/*
#define tris_usb_vpo TRISBbits.TRISB3 // Output
#define tris_usb_vmo TRISBbits.TRISB2 // Output
#define tris_usb_rcv TRISAbits.TRISA4 // Input
#define tris_usb_vp TRISCbits.TRISC5 // Input
#define tris_usb_vm TRISCbits.TRISC4 // Input
#define tris_usb_oe TRISCbits.TRISC1 // Output
#define tris_usb_suspnd TRISAbits.TRISA3 // Output
*/
/** I/O pin definitions ********************************************/
#define INPUT_PIN 1
#define OUTPUT_PIN 0
#endif //HARDWARE_PROFILE_PICDEM_FSUSB_H
funziona perfettamente.
